Suitable for use with plastic film / paper, varnished / paper, paper / paper, ink / paper and a variety of bonding conditions. Widely used in printing and packaging industry, carton, box, wine box to take the edge seal adhesive. Depending on the use, divided into the machine with sealing glue and hand-sealed plastic.
★ Product Features: green, holding the stick and strong, fast drying, fast paste positioning, high bonding strength and good operating performance, easy brushing, easy to clean coating after 5-6 minutes can be bonded.
★ Technical parameters:.
Appearance: milky light yellow viscous liquid
Solid content: 50 ± 2
PH value 7-8
Viscosity :500-800
★ Application: suitable for BOPP film and paper adhesive bond strength, suitable for a wide range of both high light film, matte film, laser film adhesive strength.
★ Note:
(1) can be manually brushing or mechanical rubber, the coated substrate should not be too thin amount of glue should be uniform and the right amount.
Immediately after the hand seal brushing lamination, For airing, no later have to keep the glue in the wet state is not completely dry before lamination. Mechanical seal according to the speed of folder gluer from folder gluer laminated roll out to check the pressure and curing the situation, if mouth to adjust the speed or mouth products immediately pressure and or replacement of the drying rate faster varieties .
Paste box 24 hours to check the bonding. Such as torn paper and plastic interface to the paper, the basic body damage, and its quality will not change for a long time. Such as the body of the paper did not reach the damage condition, please check the adequacy of the operation process or check the glue is suitable for the current operating process.
For the thick paper, glue brush should be immediately put pressure on the better of one hour, the film after curing.
★ Packing Specification: 50kg/125kg / plastic barrel
★ Shelf life: 12 months, to avoid the high temperature exposure and cryopreservation. Do not mix with other products, and unused product should be kept under seal.
